Cleaning Carpets With Baking Soda – 3 Methods
We have picked these three methods as they are definitely the best ones for carpet cleaning by using baking soda. Let’s begin.A
Removing Pet Odors and Hair:
Removing pet odor from carpet can be a tricky thing to do, but if you use baking soda for pet stain remover, you will get the wanted results. Anyhow, by using baking soda carpet deodorizer method, you will ensure a proper cleaning of your carpet.
First step is usually the easiest one. Simply add some baking soda on the area where you smell the odor. Leave there for a couple of hours and let the baking soda do its job.
After the time has passed, you will need to vacuum the whole area where you poured baking soda. Do this a couple of times just in order to be sure.
If you still smell pet odor from that area, simply repeat the process until you get the wanted results. In any case, you won’t need to do this step more than 3 times.
Non-Greasy Stains Removal: If you happen to have some nasty stain that isn’t greasy on your carpet, you can always count on baking soda to clean it to perfection. Namely, these stains don’t have any underlying residue to them and therefore, they are easier to clean.
Now, let’s see the steps that you need to follow in order to remove these stains with baking soda.
APPLY BAKING SODA
The first step requires you to sprinkle some baking soda all over the stain. Now, you can do this step any way you like, you just need to apply baking soda on carpet. With the baking soda applied to the stain, the stain will slowly begin to dissolve and become easier to vacuum.
ADD SOME HOT WATER
Now, after you sprinkle baking soda on the stain, it is time now to add some hot water. By adding some hot water to the stain, you will create a mixture that will remove the stain without any complications. Also, you can create a mixture that contains baking soda and hot water in the first place, and spray it on the stain. This way, the stain will start to dissolve and you can clean it later without any complications. By creating this mixture, you will actually save a little bit of time since you will be applying both baking soda and hot water at the same time on the stain.
LEAVE IT FOR A PROPER AMOUNT OF TIME
After you did everything so far, now it is time to leave the mixture on the carpet and wait for it to do its job. I recommend doing this late at night since that way, the mixture will have more than enough time to dissolve the stain. However, I recommend waiting at least 1 hour after applying the mixture. After that, make sure to check if the stain is dry or not. If the stain is still wet, you should wait for a couple of minutes so it dries out completely.
VACUUM THE STAIN
After the mixture did its job, it is time for you to pick up the vacuum cleaner and swipe the stain and mixture with it. This way, you will make your carpet look fresh and definitely better. When using a vacuum cleaner, make sure to vacuum the part a couple of times. This way, you will ensure that there is nothing left to vacuum and you will have perfectly cleaned carpet.
Greasy Stain Removal: Now, cleaning greasy stains is a bit harder than cleaning non-greasy ones. Therefore, you will need to put a bit more effort in the whole cleaning process. However, let’s begin.
SOAK UP THE GREASE
To start the whole process of cleaning greasy stains with baking soda, you will first need to soak as much grease as possible. You can do this by using a paper towel or a rag. However, don’t put too much pressure on the stain, since that way, you the grease will spread deep in the carpet and will be harder to remove.
APPLY BAKING SODA ON THE STAIN
Now, after you soaked a bit of grease from the stain, it is time to apply baking soda on it. You can use a bit more baking soda this time since grease is harder to dissolve. I recommend sprinkling at least 3 or 4 tablespoons of baking soda on the stain. This will ensure that your carpet will be properly cleaned. Anyhow, after you applied baking soda on the stain, you will need to leave it there overnight. This way, baking soda will slowly but surely dissolve grease and it will be easier to clean it.
VACUUM THE AREA
After some time passed, you need to pick up the vacuum and clean the whole area where you applied baking soda. However, it might seem that there is a little bit grease left on the carpet. In that case, you will need to advance to step 4 and clean it properly.
DRY THE AREA AND APPLY MORE BAKING SODA
Now, if there is still some grease left, you will need to dry the area and use some soap and sponge to clean it by hand. But, before you do that, I recommend pouring some baking soda again and let it there for 3 hours. This way, you will ensure that there won’t be any grease left on your carpet and you will get the wanted results.
Helpful Tips and Tricks
Now, let’s talk about some helpful tips and tricks that you can do when using some of these methods.
A) Measure the amount with tablespoon
It is recommendable to measure the amount of baking soda with tablespoon. This way, you will know exactly how much to use.
Two tablespoons of baking soda should be enough for non-greasy stains removal. On the other hand, three to four tablespoons should do the job when it comes to greasy stains.
B) Vacuum slowly and thoroughly
When you need to vacuum the mixture or the stain, it is recommendable to do it slowly. This way, you will ensure that every part of the area will be cleaned perfectly. When vacuuming slowly, you will not miss any part of the area where you poured baking soda.
C) Spray baking soda evenly
It is also quite important to spread baking soda all over the stain. You can’t just pour all of it in the center of the area.
By spreading baking soda all over the stain, you will ensure perfect cleaning of the carpet. This way, you will use baking soda carpet freshener in the best possible light.
D) Don’t rub or put any pressure on the carpet
If you rub baking soda against your carpet, you risk of getting the carpet damaged. So, when you pour baking soda on the carpet, don’t rub it or apply any pressure on it.
Just leave there to sit and it will get the job done perfectly. This way, you will be able to do baking soda carpet cleaner methods properly.
Frequently Asked Questions
1Will baking soda help me with moldy-smelling carpet stains?
Of course it will, but, I recommend adding some peppermint oil in the mixture so that your carpet smells better.
2Do these methods help with removing new carpet smell?
They might help, but, it is recommendable not to use baking soda on a fresh new carpet.
3Does baking soda helps with cigar smells?
Well, the main purpose of baking soda is to clean carpets from stains, not to help with such strong odors. I recommend using other stuff in order to get rid of the cigar smell. Baking soda alone is not that efficient.
There you have it, cleaning carpets with baking soda actually is pretty good and not that hard at all. With a little bit effort, you can revitalize your carpet and clean it to perfection.
It doesn’t matter if the stain is greasy or not, baking soda will help with every stain on your carpet. Also, you can use baking soda to remove pet odor from the carpet as well. All in all, we have provided you with the best methods of using baking soda as a carpet cleaner. It is all up to you to decide which method to use.
Table of Content